Battery Vehicle Society

I think it is an adjacent pin/pins carrying 12v that was leaking across through the jelly like crud in the connector Chris

Well after a longer than expected day with my diagnostic hat on I have discovered and fixed this problem and thought others may like to know what the fault was. As I said in the 1st posting - I could not initially select reverse and I was able to start (clunk) in any gear position. I stripped out th...

An embarrassing moment today when I came to select reverse the Blingo just went forward. Thats odd I thought and went through all selections hoping to see the reverse yellow light come up on the dash. But it only lit when I selected Park. I had to wiggle it around so that it was just out of Park (so...

Well a milk float is somewhat different from a Blingo and the Rawlins lady said a 53 plate Blingo cannot be considered as a Classic vehicle.

Nevertheless she quoted me £350, nearly twice my renewal quote.

JOhn

Tim, I had similar on my first Blingo. Exact same symptoms after a bit of a downhll. Loud pop etc etc. It turned out to be the controller that was making the smell. Motor was fine. So before you start pulling bits out, disconnect fuses and lift the top off the controller (just the lid where the conn...

Yup, tried all that. Van is driving fine, just the water light is permantly on

Well 36 hrs passed and no "fill up the water light" - so I filled it and then gave up. The watering required light is still on and will not reset. Van seems to work OK tho !!!

Hello Cianof - I cant see the picture, but if any of the copper wire tails are exposed on the face of the brush , change them. If you have brushes with the wear lines on and you are with 3mm of the line then think about changing them shortly.

John

Whats the longest maintenance charge you have had before the water light comes on ?

Mines been on for 22 hrs now and still no water light !!