Kelly Controller Issue

General BVS related area
bas-kirmani
Posts: 5
Joined: Sun May 04, 2008 4:29 pm
Location: Somerset

Kelly Controller Issue

Postby bas-kirmani » Thu Apr 30, 2009 2:19 pm

Hi all,

I've just plumbed up my new 96V KDH09600 Kelly controller only to find its diagnostics LED is giving me two opposite error codes: it reads both
the "Overvoltage" error and the "Low Voltage" error for the main pack. A multimeter reads 100V output at the end terminals, quite acceptable for the startup voltage.

Has anyone else had similar problems? Any ideas on how to resolve this?

Many thanks,

bas

User avatar
PHEV
Posts: 123
Joined: Wed Mar 26, 2008 5:50 pm
Location: Peacehaven/Brighton

Postby PHEV » Fri May 01, 2009 9:35 am

Hi there,

Have you checked in the software to see what LVC and HVC are set too?
Steven at Kelly support is helpfull..

Steve
*Mazda MX-5, 300KW peak, 300v 20KW/h lipo pack, Soliton 1000A controller. 1100KG.
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com

bas-kirmani
Posts: 5
Joined: Sun May 04, 2008 4:29 pm
Location: Somerset

HVS

Postby bas-kirmani » Fri May 01, 2009 10:35 am

Hi,

Yes, I've tried tweaking the setting on the PC interface. I'll try giving Kelly a call.

Um, is that the Jozzbike in your picture?

bas

User avatar
PHEV
Posts: 123
Joined: Wed Mar 26, 2008 5:50 pm
Location: Peacehaven/Brighton

Postby PHEV » Sun May 03, 2009 10:55 am

*Mazda MX-5, 300KW peak, 300v 20KW/h lipo pack, Soliton 1000A controller. 1100KG.
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com


Return to “General”

Who is online

Users browsing this forum: No registered users and 7 guests