Page 1 of 1

how can you convert from NiCd to LIon?

Posted: Wed Apr 28, 2010 7:04 pm
by tipidave1
Being somewhat new to the world of electric driving, I was wondering what steps one would need to take in order to convert to a Lithium based based battery technology from a Nicad. I have a berlingo EV and wondered how I would need to change the charging software and controller. Any advice?
Dave :D

Re: how can you convert from NiCd to LIon?

Posted: Wed Apr 28, 2010 9:33 pm
by cianof
Evan Tuer has some details about his conversion to LiFePo4 on his website.
http://www.tuer.co.uk/p106-lithium.htm

There's another LiFePo4 conversion by a group in the Czech Republic.
http://www.evalbum.com/2640
http://www.evcgroup.cz/en/electromobiles-psa/

And there's a guy in Finland who has done a conversion.
http://www.evalbum.com/641
http://www.fevt.com/technology

Re: how can you convert from NiCd to LIon?

Posted: Thu Apr 29, 2010 5:50 am
by timpootle
... and me! viewtopic.php?f=6&t=1503

My motive is increased range, closely followed by not being able to get new NiCads.

Rob Sharpe is doing a lithium 106 following Evan's success. Evan has modified his controller to charge at constant voltage rather than the constant current the NiCads need (did I get that the right way around?) and added a separate BMS to look after his cells.

Other than that, I rather hope I can just connect it up and drive away!

Re: how can you convert from NiCd to LIon?

Posted: Thu Apr 29, 2010 10:01 pm
by ChrisB
I think the general issue is cost :cry:

Although it does seem to be coming down in price now a tadge.

ChrisB