I have a PSA interface and Lexia / Peugeot Planet software which I sometimes use to talk to my Peugeot 206. Tried connecting to the Electrique but the only thing it seems to read is the Webasto heater!
A helpful chap suggested I tell it it is a Peugeot E-Partner instead, however it asked for VIN and wouldn't procede without one, any one got any advice?
Will
Getting Lexia / PP2000 to talk to Berlingo Electrique
-
- Posts: 93
- Joined: Sun Oct 04, 2015 3:45 pm
-
- Posts: 93
- Joined: Sun Oct 04, 2015 3:45 pm
Re: Getting Lexia / PP2000 to talk to Berlingo Electrique
Bump. Is it usually possible , if so what settings, thanks.
- Flying John
- Site Staff
- Posts: 335
- Joined: Fri Jul 14, 2006 5:24 pm
- Location: Kent
Re: Getting Lexia / PP2000 to talk to Berlingo Electrique
We had the Actia version of the tool and we used to use the Partner option, then enter the middle 4 digits of the type number printed on a label in the drivers door shut. From memory it was 9422. Then you were asked to switch ignition on and the tool tried to communicate with the van. After that you could scroll through the menu options until you got to fuel type and there was an Electric option.
After selecting electric there were a number of options to help you test and diagnose faults as well as doing maint charges etc.
John
After selecting electric there were a number of options to help you test and diagnose faults as well as doing maint charges etc.
John
-
- Posts: 93
- Joined: Sun Oct 04, 2015 3:45 pm
Re: Getting Lexia / PP2000 to talk to Berlingo Electrique
THANKYOU!
I will give that a go.
I will give that a go.
Return to “Citroen Berlingo Electrique or other PSA vehicles”
Who is online
Users browsing this forum: No registered users and 10 guests