Hi all,
I've just plumbed up my new 96V KDH09600 Kelly controller only to find its diagnostics LED is giving me two opposite error codes: it reads both
the "Overvoltage" error and the "Low Voltage" error for the main pack. A multimeter reads 100V output at the end terminals, quite acceptable for the startup voltage.
Has anyone else had similar problems? Any ideas on how to resolve this?
Many thanks,
bas
Kelly Controller Issue
Hi there,
Have you checked in the software to see what LVC and HVC are set too?
Steven at Kelly support is helpfull..
Steve
Have you checked in the software to see what LVC and HVC are set too?
Steven at Kelly support is helpfull..
Steve
*Mazda MX-5, 300KW peak, 300v 20KW/h lipo pack, Soliton 1000A controller. 1100KG.
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com
-
- Posts: 5
- Joined: Sun May 04, 2008 4:29 pm
- Location: Somerset
HVS
Hi,
Yes, I've tried tweaking the setting on the PC interface. I'll try giving Kelly a call.
Um, is that the Jozzbike in your picture?
bas
Yes, I've tried tweaking the setting on the PC interface. I'll try giving Kelly a call.
Um, is that the Jozzbike in your picture?
bas
One of them:) http://www.batteryvehiclesociety.org.uk ... 4694#14694 ...theres another:)
*Mazda MX-5, 300KW peak, 300v 20KW/h lipo pack, Soliton 1000A controller. 1100KG.
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com
*Ducati SS twin Agni 80HP peak.
*Aprilia RS motorcycle, 500A controller, Cedric's AgniMotor, 96v 6kw/h LiPo pack, 130kg, 90mph.
www.jozztek.com
Who is online
Users browsing this forum: No registered users and 68 guests