As there is no board dedicated to charging, and the fact that charging covers all cars, I thought I would start the thread here - as it is me and I am wanting one for my citroen C1 ev'ie car.
My car has a dumb charger in it - all it wants to see is 240 volt mains power and it will draw what it requires up to a maimum of about 10 amps.
Now there are lots of home chargers being installed for free courtesy of the government. But alas, these only come with a J1772 type 1 or type 2 plug on them - they do not supply them with a 16 amp commando type plug on the end of the lead.
Now, on ebay there has appeard a type 2 to 16 amp lead which is great if you are out and about and want to use a charging post where the 13 amp plug is already in use, or if the post only has type 2 sockets on it. This doesn't help for those with home charging points with the type 1 plug.
I know there are a few C1'ers on this site, and some Gwizzers, and I am thinking that perhaps we could club together to see if we can get something designed and built that will fit our needs.
I will put together a drawing of the sort of thing I am thinking about and post it here soon. I will also link this thread on to the GWIZ forum to see if any one from there is also interested - and too perhaps the Twizzy forum ( on leaf talk ) as well.
Matt
Charging adaptors
Moderator: mattcarr
Re: Charging adaptors
Here is my simple picture of what I would like.
The 16 amp commando end would be plugged in to the car, and I could then just plug in the lead from the home charging unit.
The 16 amp commando end would be plugged in to the car, and I could then just plug in the lead from the home charging unit.
-
- Posts: 23
- Joined: Tue Jul 10, 2012 5:07 pm
Re: Charging adaptors
Here's the board you want:
http://modularevpower.com/Active_Vehicl ... opment.htm
Available on ebay. Simply place in a box with J1772 socket connected to the AVC2 and the +/-/E routed to a commando socket on the other side. Or upgrade your vehicle side socket to J1772 and use the AVC2.
http://modularevpower.com/Active_Vehicl ... opment.htm
Available on ebay. Simply place in a box with J1772 socket connected to the AVC2 and the +/-/E routed to a commando socket on the other side. Or upgrade your vehicle side socket to J1772 and use the AVC2.
Re: Charging adaptors
Photos of boxes made by aminorjourney and dpeilow are shown in this thread:
viewtopic.php?f=3&t=3449
Do we need an AVC2 group buy to save postage from the USA?
viewtopic.php?f=3&t=3449
Do we need an AVC2 group buy to save postage from the USA?
Tim Crumpton
- Kevin Sharpe
- Posts: 489
- Joined: Thu Jul 29, 2010 5:39 pm
- Location: Bradford on Avon
- Contact:
Re: Charging adaptors
or buy direct from Amsterdam and save on import duties...timpootle wrote:Do we need an AVC2 group buy to save postage from the USA?
http://wh.newelectric.nl/proddetail.php?prod=AVC2
Kevin Sharpe - Founder and Patron for UK registered charity Zero Carbon World. Founder and Chairman Mainpine Group. http://about.me/kevinsharpe
Re: Charging adaptors
I know this is an old thread but I have just been referred by another forum.
The AV2 is not suitable for this adapter as it requires a 12v supply.
All that is required I think is a diode and 1.2k ohm resistor to ground to indicate to the charger that car is connected and requesting power. The push button on the plug is intended to indicate to the car to stop charging so would not be implemented in this case. Wikipedia is a helpful source for details.
The AV2 would be most useful for upgrading cars to public charging spec. Any interest in a combined purchase?
Rory
The AV2 is not suitable for this adapter as it requires a 12v supply.
All that is required I think is a diode and 1.2k ohm resistor to ground to indicate to the charger that car is connected and requesting power. The push button on the plug is intended to indicate to the car to stop charging so would not be implemented in this case. Wikipedia is a helpful source for details.
The AV2 would be most useful for upgrading cars to public charging spec. Any interest in a combined purchase?
Rory
Electric Seicento conversion, Leaf
Who is online
Users browsing this forum: No registered users and 6 guests