Page 1 of 1

no voltage at controller

Posted: Mon Mar 31, 2014 11:42 am
by berlingoian
So, Highend arrived with new battery. All back in place in reverse order. Auxiliary battery in. Fuses replaced, no voltage at controller.....

What have I done wrong....?

Re: no voltage at controller

Posted: Mon Mar 31, 2014 1:50 pm
by berlingoian
Revision...

Voltage @ controller is 32
All battery packs are reading what I'd expect.
Treble checked reassembly.
I'm going to remove aux battery and charge that some more, it was at 12.4, and do some gardening instead :-)

Re: no voltage at controller

Posted: Mon Mar 31, 2014 1:57 pm
by berlingoian
Revision...

Voltage @ controller is 32
All battery packs are reading what I'd expect.
Treble checked reassembly.
I'm going to remove aux battery and charge that some more, it was at 12.4, and do some gardening instead :-)

Re: no voltage at controller

Posted: Mon Mar 31, 2014 3:23 pm
by berlingoian
Doh!
I've only gone and joined up the battery packs wrong way round. Hope I haven't damaged any thing.....

Re: no voltage at controller

Posted: Mon Mar 31, 2014 8:24 pm
by timpootle
berlingoian wrote:Doh!
I've only gone and joined up the battery packs wrong way round. Hope I haven't damaged any thing.....

Oops. Fingers crossed for you.

Re: no voltage at controller

Posted: Tue Apr 01, 2014 5:05 am
by berlingoian
She lives again. So far so good.
Routing of cables and pipes make much more sense when connected right way round :-)

Re: no voltage at controller

Posted: Tue Apr 01, 2014 3:57 pm
by highend
:D

Re: no voltage at controller

Posted: Sat Apr 05, 2014 9:29 am
by jamesingram
Highend ,
I PM'd re. segem controller, not sure if you picked it up
cheers for any help
James

Re: no voltage at controller

Posted: Sat Apr 05, 2014 2:37 pm
by berlingoian
Gently increasing mileage every day, topping up at 55 and finally at 35% after 35 miles. I'm happy with that any more in future is a bonus.

Thank you for your support and advice.
Part of me can't wait to do it all again
:-) :D