smart four two

Have you made or bought a converted vehicle if so this is for you
mrfizz
Posts: 10
Joined: Mon Sep 14, 2009 9:11 pm

smart four two

Postby mrfizz » Fri Nov 13, 2009 9:09 pm

Hi i have aquired a smart four two (glider) never had a engine fitted so very clean.Has anyone converted a smart on here?I have got a d+d 15-6 motor and a curtiss 1209 controller the adapter plate is being made now to mate it to the original gearbox that is where my headaches are starting do i lock it in one gear or somehow make it use all 6 gears or dismantle box and use 2 and four/five gears with a manual clutch, help advise needed and appreciated thanks :(

User avatar
timpootle
Posts: 1361
Joined: Wed Mar 14, 2007 12:13 pm
Location: Chorlton-cum-Hardy, UK

Postby timpootle » Sat Nov 14, 2009 7:26 pm

Hello MrFizz

Where in the world are you?

There are 4 Smart cars on the EValbum for you to get ideas on power needed etc.

The general advice I have seen given here is to keep the gearbox but leave it in 2nd unless you need to climb a very steep hill.
Tim Crumpton

mrfizz
Posts: 10
Joined: Mon Sep 14, 2009 9:11 pm

Postby mrfizz » Sat Nov 14, 2009 10:33 pm

I am in essex have a berlingo electric at the moment

GregsGarage
Posts: 870
Joined: Tue Apr 01, 2008 5:27 pm
Location: Galashiels, Scottish Borders
Contact:

Postby GregsGarage » Sun Nov 15, 2009 3:24 pm

For that size controller I would keep the ability to use all the gears in the gearbox and possibly the clutch as well. You will probably find you need different gears for different driving conditions. You may only need 2 or three gears, but no reason to limit your options. Also you can use the gearbox reverse instead of reversing the motor with a reversing contactor.
Greg Fordyce

Daewoo Matiz
http://www.evalbum.com/4191

andylaurence
Posts: 108
Joined: Wed Apr 25, 2007 6:45 pm
Location: Bristol
Contact:

Postby andylaurence » Mon Nov 16, 2009 9:15 am

How are you going to select gears? It's a semi-automatic gearbox that's controlled by the ECU for the engine. You'd need to make your own ECU to control the motors that change gear, I guess.
Image
Above figures include track days and the odd competition.

mrfizz
Posts: 10
Joined: Mon Sep 14, 2009 9:11 pm

four two

Postby mrfizz » Mon Nov 16, 2009 9:25 am

Yes that was the thoughts i was having about gearchange problem and ecu i can put in a hydraulic clutch pedal kit and change the electonic clutch actuator on the gearbox but still have problem of gearchanging which was why i was going to use just two gears cable,just thoughts at the moment operated


Return to “Conversions”

Who is online

Users browsing this forum: No registered users and 6 guests