![Image](http://www.pluginev.nl/images/Image012.jpg)
This could be the probable couse or is it the effect?:
![Image](http://www.pluginev.nl/images/Image022.jpg)
a hole was burned into the alloy casting (at falure number 1, see down here)
I found 4 different failures:
1 Capacitor c12 has a burned leg and also burned the track away
2 Capacitor c11 has a burned leg and also burned the track away from the standing cardboard until the wide track. the remains of this track are sticked to the alloy casting, see picture above.
3 1 leg of the standing cardboard is burned away
4 1 end power module is broken
![Image](http://www.pluginev.nl/images/Image031.jpg)
![Image](http://www.pluginev.nl/images/Image030.jpg)
![Image](http://www.pluginev.nl/images/Image032.jpg)
Replacing the capacitors and the power end module is easy, also repairing the cardboard tracks is not hard to do. I am worried though that more parts are broken. Has anyone experienced this kind of problem, does anyone have measuring data available? Or can anyone advice in this matter?